Coaxial cylindrical gear reducer ZSC (A) 400-24.08-II reducer is easy to install

ZSC (A) 400-24.08-II reducer is a vertical set type involute cylindrical gear reducer. The following is its related introduction:

Model meaning: "ZSC (A)" refers to the vertical set type involute cylindrical gear reducer series; '400' refers to the total center distance of the reducer being 400mm; 24.08 "is the transmission ratio, which is the ratio of the input shaft speed to the output shaft speed; 'II' represents the assembly form, and different assembly forms have different installation dimensions and installation methods.

applicability

Speed: The input speed of the high-speed shaft is not greater than 1500 revolutions per minute.

Circular speed: The circular speed of gear transmission shall not exceed 10 meters per second.

Working environment temperature: -40 ℃ to+45 ℃.

Operation direction: It can operate in both forward and reverse directions.

Structural features:

Gear transmission: three-stage cylindrical gear transmission is adopted, and the gears are generally made of high-strength low-carbon alloy steel through carburizing and quenching. The tooth surface hardness is high, the precision is high, and the contact is good, which can ensure high transmission efficiency, smooth operation, and low noise.

Output shaft: The output shaft is a hollow shaft, which is easy to fit on the shaft of the running mechanism wheel group. There is a positioning lock shaft hole on the reducer housing, which can be connected and fixed to the structure after installation and adjustment.

Box: Steel cast iron box is usually used, which has undergone aging treatment and has good mechanical properties. It can effectively protect internal transmission components while also providing good sealing and heat dissipation.

Installation dimensions: The center distance is 400mm, and specific data such as outline dimensions and installation dimensions can refer to relevant manuals or product manuals. For example, the external dimensions may include length, width, height, etc., and the installation dimensions involve the position and size of the installation holes. For the ZSC (A) 400 reducer, the partial installation dimensions are: contour dimensions of 105 × 130 × 165, with an active shaft diameter of 30 (s6) and a length of 55, etc.

Application areas: Mainly used for mechanical equipment deceleration transmission in mining, metallurgy, cement, construction, chemical, light industry and other industries, especially suitable for work environments where vertical installation is adopted due to structural limitations, such as bridge crane trolley operating mechanism and gantry crane operating mechanism