Performance parameters, installation and maintenance of ZFY hard tooth surface cylindrical gear reducer

performance parameter

Model specifications: The main models include ZFY180 ZFY200、ZFY225、ZFY250、ZFY280、ZFY320、ZFY360、ZFY450、ZFY500、ZFY560、ZFY630、ZFY710、ZFY800  Wait.

Transmission ratio: The transmission ratio range is wide, generally between 100-500, and can be selected according to different work requirements.

Input speed: The high-speed shaft speed should not exceed 1500r/min.

Gear circumferential speed: The gear circumferential speed is greater than 20m/s.

Working environment temperature: The working environment is -40 ℃ -45 ℃. When the working environment temperature is below 0 ℃, the lubricating oil must be heated to above 0 ℃ before starting; When the ambient temperature exceeds 45 ℃, insulation and cooling measures must be taken.

Installation and maintenance

Installation method: It can be installed horizontally or vertically, and the specific installation method is selected according to the structure and working requirements of the equipment.

Installation precautions: During installation, the levelness and verticality of the gearbox should be ensured to avoid excessive external forces and impacts on the gearbox. At the same time, attention should be paid to whether the connection between the reducer and other equipment is firm to avoid loosening.

Maintenance: Regularly check the lubricating oil quantity and quality of the gearbox, and replace the lubricating oil in a timely manner; Regularly inspect the wear of gears, shafts, bearings, and other components of the gearbox, and replace severely worn parts in a timely manner; Keep the gearbox clean and prevent dust and debris from entering the interior of the gearbox.